480GB SSD w/PCI-E Controller for Apple Mac Pro 4,1/5,1 Pre-installed *macOS High Sierra 10.13.6
Condition : Brand New with 1 year limited warranty
Upgrade your Mac Pro Tower from the build-in outdated SATA II (3Gb/s) to Latest SATA III (6Gb/s) Speed , *20x faster & Reliable than Traditional Hard Disk Drive
Compatible Mac Model : Apple MacPro 4,1/5,1 from 2009-2012 (4,1 from 2009 require an upgrade to 5,1 firmware update software , please Enquiry for details)
All you need is Plug & Play Switch the original HDD to this PCIe SSD , and all good to go.
*Newer Graphics Video card like HD7870 , R9370X, HD7950/7970 , GTX670/680 or higher model recommended.
Compliant with PCI Express Base Spec. Revision 2.0/1.0a
4x lane PCI-Express Form Factor (2x lane PCI-Express 2.0 interface Supports Communication Bandwidth up to 10.0Gbps)
Three Common SATA III Ports + one small 4-Pin power output connector (for 2nd 2.5" SSD)
One 7+15pin SATA Female interface ( 2.5'' SATA HDD/SSD )
Two NGFF B-key socket For NGFF 2230/2242/2260/2280 B-key *SATA SSD
One Common SATA port and the 2.5" SATA Port are Shared By Two NGFF B-key socket, and can be changed manually by Jumpers
Supports up to Four SATA III (6.0Gbps) with point-to-point connectivity
One 2.5" SSD/HDD + Three SATA III HDD/SSD / Two NGFF M.2 SATA SSD + Two SATA III HDD/SSD
Supports native Command Queue (NCQ)
Supports Hardware RAID 0, 1, 10 and JBOD (windows/Linux)
HyperDuo mode supports Safe mode (Mirrored Protection) and Capacity mode(Cost-Optimized)
FIS based Port Multiplier
Marvell 88SE9230 HyperDuo Technology
Mac OSX Disk Utility RAID Supported
*Actual performance may vary based on hardware, software, and overall system configuration.
We Also Recommend
120GB SSD Upgrade for MacPro1,1/2,1(2006-2007) *Pre-installed with Mac OS X El Capitan 10.11.6
120GB SSD Upgrade for MacPro1,1/2,1(2006-2007) *Pre-installed with Mac OS X Yosemite 10.10.5